|
|
09-15-2014, 11:06 AM | #2 |
BMWZ4Rider
76
Rep 801
Posts |
Removal should be very easy just like the front bumper COVER.
Remove all the plastic screws inside the rear wells, under the rear difusser/valance, POSSIBLY you will have remove the rear taillights to get to the screws behind the taillights and the bumper covers will pull off. Make notes of all the fasteners as some sizes are different sizes( In some cases) I have had the bumper covers-F and R and rocker panels on my former ride, an Acura TL-Type S and it was very easy and straight forward and duilt just like the Bimmer. When you get it off you will scratch your head and say "What The F_____" This is all there is to this EXPENSIVE bumper cover.
__________________
2009 BMW Z4 35i/SMG/DCT/Premium,Cold, Sound PK/Com Acc/Ash/PDC/Wind Deflector/Smoked Reflectors/Red Calipers/Cl Mask/M Series Grill/6000K LED's/De-Badged/M Pedals/CF Mirrors-Engine Cover/Stubby/20% Tint/H8 LED's/LCI Side Markers/Sniper Sprint Spoiler/VMR V710/H&R Sport Springs/KN.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|