06-21-2013, 05:24 PM | #1 |
Private First Class
80
Rep 167
Posts |
Alpina Replicas & wheel offset
So here's my question. I am thinking about getting Alpina B7 style wheels. I found a set which are 19x8.5 with a 35 offset. There is also a staggered set available with I believe with a 19x9 or 19x9.5 rear but has a 20 offset.
I am not to familiar about the offset on which will fit and what looks good. What are your opinions? |
06-21-2013, 06:11 PM | #2 |
Private First Class
80
Rep 167
Posts |
Thanks for the info. Do you think I should run a squared set-up or go with a slightly staggered with a 255/35/19 on the rear and keep the 225/40/19 up front.
|
Appreciate
0
|
06-21-2013, 06:56 PM | #3 |
Major
209
Rep 1,201
Posts |
This is a great idea! Alpina wheels would look awesome on the F30. Also, if you do 8.5 all around, then do a 245 square or 245/255. I have 245/255 on a 8.5 inch square setup, only because I didn't want to have less grip in the back than stock. I already get wheel spin with 255 in the back when flooring it. But if you prefer to be able to rotate, then 245 will be your best choice.
|
Appreciate
0
|
06-29-2013, 12:51 PM | #5 | |
467
Rep 4,592
Posts |
Quote:
40-45 is a good fitment for the rear. You can use a spacer on the 19x8.5 ET35 to push it out a little and keep the setup squared too. |
|
Appreciate
0
|
07-06-2013, 07:43 PM | #7 |
Captain
150
Rep 674
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|