What is your current Wheel/Tyre/Offset Set up? (Pics)

[Fazerfahrer]

Originally Posted by jake169

Thanks for that detailed info Thorsten. Regarding 'boottming out', you interpreted correctly. I am heavily considering the Eibach springs, but don't want to get springs now and if I don't like it, then get the KWV3. Guess I will just wait till I save up for the KWV3. What spacers are you running in the front/back.

Thanks.
Jake.

Hi Jake,

i don`t use any additonal spacers. Please keep in mind that the 437M have the same offset as for example the 326M but are each 1" wider (9" & 10" x 19"), therefor you have the same effect than with 326M plus 12,7mm spacers on each side/wheel.

[Seaice]

Type 276 with 15/10mm spacers

[taranfx]

Originally Posted by Zteve

VMR V803
19x8.5 +35
19x9.5 +35

20mm spacers front
15mm spacers rear

Lowered on Eibach springs

what is the width of tires?

[Zteve]

Originally Posted by taranfx

what is the width of tires?

225/35/19 front
255/30/19 rear

[orionx]

Question: How much extra space do we have between F/R stock wheel and stock suspension strut? Would a wider wheel that is 26mm closer to suspension strut cause rubbing?

A friend has a set of 9Jx18 ET42 square setup with 235/45 tires to sell and I'm wondering if this setup would work or not.

It seems like the front wheels will be 25.7mm closer to suspension struts whereas the rear wheels will be 8.4mm closer and poke out 4.4mm more. In the attached pics, orange lines denote the recommended stock setup whereas green lines denote the 9Jx18 ET42 setup.

URLs to actual calculations:
Front --> https://www.willtheyfit.com/index.ph...h=9&offset2=42

Rear --> https://www.willtheyfit.com/index.ph...h=9&offset2=42

Got the recommended stock specs from here:
https://www.wheel-size.com/size/bmw/...ve35i-usdm-300
Front: 8Jx18 ET29, 225/40ZR18 88W
Rear: 8.5Jx18 ET40, 255/35ZR18 90W

[scootr]

10 front
18 rear
35 offset 17s

[shockin330i]

Finally made the switch

[shockin330i]

Well that didn't work. Let's try this again...

[Z4Fool]

Originally Posted by f5joe

Just a killer look!

http://e89.zpost.com/forums/attachme...1&d=1462942310

Damn right!

[buiyaa]

2015 35is

H&R springs
BBS CI R (satin bronze)
Michelin Pilot Sport 4S
Front:19x8.5 et 35mm. 235x35x19
Rear: 19x9 et 44mm. 265x30x19

No rubbing issues at all.

[shadowe89]

Originally Posted by Fazerfahrer

Hello,

I'm riding the M437 in 9x19 ET29 with 235/35-19 and 10x19 ET40 with 265/30-19 Goodyear F1. This set up should be close to your proposal. Springs are Eibach Pro Kit.

Sorry to revive an old post. But I just have to ask, did you do any other modifications to not rub?

I just picked up a set of 788M wheels 19x 9J ET 25 and 10J ET40 I want to know if these will rub.

I see Fazerfahrer isn’t active anymore but does anyone else have some input?

2011 E89 3.0i N52 stock suspension

[B21]

Originally Posted by shadowe89

Sorry to revive an old post. But I just have to ask, did you do any other modifications to not rub?

I just picked up a set of 788M wheels 19x 9J ET 25 and 10J ET40 I want to know if these will rub.

I see Fazerfahrer isn’t active anymore but does anyone else have some input?

2011 E89 3.0i N52 stock suspension

Depends on the tyres but with 235/35 and 275/30 you should be ok..assuming stock geometry

[shadowe89]

Originally Posted by B21

Depends on the tyres but with 235/35 and 275/30 you should be ok..assuming stock geometry

Thanks brother!

[spadman]

.

[Sachak]

2009 Z4 35i
Continental sport contact 6
235/35/19 front with 15mm wheel spacers
275/30/19 Rears with 10mm wheel spacers
ISC Coilover suspension


https://e89.zpost.com/forums/attachm...1&d=1692139002

https://e89.zpost.com/forums/attachm...1&d=1692139002

https://e89.zpost.com/forums/attachm...1&d=1692139002

https://e89.zpost.com/forums/attachm...1&d=1692139002

https://e89.zpost.com/forums/attachm...1&d=1692139002