|
|
06-14-2018, 11:47 PM | #1 |
Private
12
Rep 65
Posts |
Ebay JCS CF lip spoiler and Ikon front lip review
Bored and drunk so just going to post about the lip spoiler and front lip I purchased off of ebay the other day. Haven't seen any other post like it really so maybe it'd help someone.
Rear carbon fiber lip spoiler was from jcsportline user on ebay https://www.ebay.com/itm/Fits-09-16-...53.m1438.l2649 Would definitely recommend this one, fitment was perfect, carbon fiber weaves look good. It came with 3M double sided tape already on it and it literally took like 5 minutes to measure and install. I did however add a few more pieces of 3M towards the middle section. Up to your taste whether you like it or not. I think a debadged Z4 looks too plain so I got it. Album: View post on imgur.com The CF front lip was purchased from ikonmotorsports user on ebay. They are pretty popular as far as "ebay" goes but wow do I regret it... Link is: https://www.ebay.com/itm/Fits-09-16-...53.m1438.l2649 The lip itself was packaged very tightly screwing up the fitment badly. It took about 2 hours with a heat gun to mold it back to an acceptable shape. There was zero hardware & instructions, only thing it came with was the lip. The whole piece was not carbon fiber to be expected. Even after all the heatgun work, the middle section did not fit perfectly as you can see from the pictures below. The sides were surprisingly good. I had to use my own nut and bolt and a drill bit to make the wholes to install. Only the very outer edge used the factor clip. I also put some pieces of 3m Tape on the middle section. Fitment was terrible, no hardware and instructions. I would not recommend ikonmotorsports. I got it during ebay sale for 320 but normally it is 400, I'd go with another ebay brand if you have to. Album: View post on imgur.com Gaps even with lots of molding and heatgun. Due to bending it to fit, the carbon fiber teared a bit... Just glad the side fitment was spot on, no gaps Side shot of z4 35is with front lip and rear lip spoiler How do I post the pictures with smaller resolution for the post but full size in link? Cheers! |
07-12-2018, 11:13 AM | #3 |
Second Lieutenant
48
Rep 247
Posts
Drives: 2015 F15 50i, 2016 E89 35is
Join Date: Jun 2013
Location: Tupelo, MS.
|
I popped my lower grille out and did a matte black wrap in that area to hide the white. I put the wrap behind and around the edge where that grille snaps in to hide all the body color.
|
Appreciate
0
|
07-14-2018, 08:51 PM | #5 | |
Lieutenant
162
Rep 561
Posts |
Quote:
This may not be a perfect description, but it should help. Filippo
__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport. Last edited by fmorelli; 07-17-2018 at 06:50 AM.. |
|
Appreciate
1
Tangent297.50 |
Post Reply |
Bookmarks |
|
|