BMW Z4 sDrive35is side badge placement

[AM26]

Hello!

I took my Z4 sDrive35is to the shop to paint my model designation badges in black color. Long story short guys at the shop do not know where to put those badges back... I would like to know the placement of the badges so if any of you have any templates, or full E89 service manual and could take a screenshot of measurements, or if any of you who have the 35is model could simply measure it out and share the pictures, I would be very thankful.

Some examples:

Screenshot from E82 service manual as an example:


Template example is in this thread: https://www.1addicts.com/forums/showthread.php?t=543357

[cdmulders]

Originally Posted by AM26

I took my Z4 sDrive35is to the shop to paint my model designation badges in black color. Long story short guys at the shop do not know where to put those badges back... I would like to know the placement of the badges so if any of you have any templates, or full E89 service manual and could take a screenshot of measurements, or if any of you who have the 35is model could simply measure it out and share the pictures, I would be very thankful.

I don't have any service manuals, but I offer you these photos to give you a visual perspective on where the badges go on a pre-LCI 35i.

Cheers.

[AM26]

Originally Posted by cdmulders

I don't have any service manuals, but I offer you these photos to give you a visual perspective on where the badges go on a pre-LCI 35i.

Cheers.

Attachment 2023931

Attachment 2023932

Attachment 2023933

Thank you very much! If you have any free time, could you measure it out as for example like in the picture below and also from the top of the side panel, please?

[IMG]https://f30.bimmerpost.com/forums/at...8;d=1400753495[/IMG]

[cdmulders]

Originally Posted by AM26

Thank you very much! If you have any free time, could you measure it out as for example like in the picture below and also from the top of the side panel, please?

Here you go. I did a quick drawing of the right hand front fender, showing the fender top, the door line, the BMW logo, and the badge below it. The drawing is not to scale and is included below.

The measurements I took are:
A. The distance from the top of the fender to the top of the badge
B. The distance from the fender's edge along the door to the closest top corner of the badge
C. The distance from the fender's edge along the door to the closest bottom corner of the badge.

Measurements for right hand fender / left hand fender are as follows:
A. 12.3 / 12.3 cm
B. 5.5 / 5.3 cm
C. 4.7 / 5.1 cm

Here is the picture I drew:


I hope this helps.

Cheers.

[AM26]

Originally Posted by cdmulders

Here you go. I did a quick drawing of the right hand front fender, showing the fender top, the door line, the BMW logo, and the badge below it. The drawing is not to scale and is included below.

The measurements I took are:
A. The distance from the top of the fender to the top of the badge
B. The distance from the fender's edge along the door to the closest top corner of the badge
C. The distance from the fender's edge along the door to the closest bottom corner of the badge.

Measurements for right hand fender / left hand fender are as follows:
A. 12.3 / 12.3 cm
B. 5.5 / 5.3 cm
C. 4.7 / 5.1 cm

Here is the picture I drew:
Attachment 2025274

I hope this helps.

Cheers.

Thank you very much!