|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
02-06-2015, 05:36 PM | #45 |
Brigadier General
205
Rep 3,330
Posts |
Here is a set of Deep Concave 20x9.5 20x11 F14s we built for our customer's S550 GT PP in under 2 weeks!
We'll be wrapping them with some meaty 275/35/20 315/35/20 Michelin PSS, and black TPMS Sensors Installed photos to come! I had a chance to weigh these for you guys: 20x9.5 +25 - 26.4 lbs 20x11 +55 - 26.5 lbs The lower offset of the 20x9.5s probably balanced out the additional weight of the higher offset 20x11s, so the weights came out pretty much the same. Heres a track setup we put together for a 370Z on 18x10.5 square PF01s, wrapped in 275/35/18 Toyo RA-1s which we heat cycled and shaved for the track! This full setup only came out to 48 lbs each! |
Appreciate
0
|
02-11-2015, 05:49 PM | #46 |
Brigadier General
205
Rep 3,330
Posts |
So we teamed up with Vorsteiner recently to help them release their new VFF designs for 2015.
We ended up fitting a set of 20x8.5 20x10 VFF103s in their Carbon Graphite finish with a set of 245/35/20 275/30/20 Pirelli P Zeros. Here are some photos I was able to snap after the install! First Impressions: There was an instant gain in performance! The VFF103 20x10 rears only weigh 22 lbs, compared to the ~30 lb 20x10s on the car before. The car felt lighter and quicker, flow formed really makes a difference! The Pirelli P Zeros were of course amazing, difficult to get them to even squeak on a hard turn. Heres a sneak peek from the Vorsteiner shoot! Let me know if you have any questions! |
Appreciate
0
|
02-16-2015, 07:04 PM | #47 |
Brigadier General
205
Rep 3,330
Posts |
I had a chance to check out a Bathurst in Gunmetal over the weekend.
Didnt have the time to get brake measurements or weigh it unfortunately, just enough time to grab some quick photos. I was impressed by how great the wheel looked! Heres the back pad machinging, as you can deep lots of pocketing to reduce the weight as much as possible! I liked these indents they designed into inner lip, great detailing! Deep concavity for the 20x10! Deep concavity for the 20x10! Cant wait to see this wheel in their silver finish, I think it'll look even better with the machined faces! Inventory is slowly rolling in, everything should be in stock and shipping within the next month! |
Appreciate
0
|
03-04-2015, 05:16 PM | #48 |
Brigadier General
205
Rep 3,330
Posts |
Had a large batch of some of our most popular finishes come through!
Left to right: F14 - Gloss Metallic Silver CF10 - Gloss Race Gold F14 SDC - Matte Black F14 SDC - Laser Purple (2 Stage Upgraded Option) |
Appreciate
0
|
03-12-2015, 02:18 PM | #49 |
Brigadier General
205
Rep 3,330
Posts |
Theres stilov's 996TT on Matte Antique Bronze F14s
We did a 18x9 18x12 setup with Super Deep Concave rears on his car which fits flush with no rubbing! |
Appreciate
0
|
03-20-2015, 05:39 PM | #50 |
Brigadier General
205
Rep 3,330
Posts |
Heres the first set of F14s we've done in Full Polish with clearcoat for a C63!
I'm not too sure how I feel about these... but its definitely something sexual.... WOW!! |
Appreciate
0
|
03-27-2015, 01:50 PM | #51 |
Brigadier General
205
Rep 3,330
Posts |
We recently finished up this install of 20x9.5 F14s for our customer's Sepang Blue RS5
We went with offsets to match the OEM wheel fitment w/ spacers, and a Gloss Black powdercoat to match the Black Optics package He reused his OEM tires, and when we compared the F14 weight with his OEM 20" rotors, he saved over 5lbs per wheel! |
Appreciate
0
|
04-09-2015, 06:51 PM | #52 |
Brigadier General
205
Rep 3,330
Posts |
Heres a set of fully forged monoblock AG F321s we built for one of our 2015 Mustang customers
We went with 20x10 20x11 with massive 285/35/20 315/35/20 Michelin PSS! We finished them in a gorgeous Bespoke 1 Metallic Silver powdercoat! He has an impressive build in progress and we cant wait to get some photos of the wheels installed! |
Appreciate
0
|
04-15-2015, 06:41 PM | #53 |
Brigadier General
205
Rep 3,330
Posts |
We have two brand new rotary forged wheel options now available!
Rotary forming is an advanced manufacturing technique that creates a stronger and lighter wheel structure to improve vehicle performance capabilities. This procedure utilizes 3 hydraulic rollers with pressure and heat to stretch the barrel of the wheel to the desired specification. The pressure is applied to the inner part of the wheel while the spinning stretches and compresses the alloy, altering the characteristics of the alloy. This method of wheel making results in a dramatic reduction in weight while enhancing structural rigidity and durability. Rohana RF2 Matte Black Brushed Silver Brushed Candy Red (Limited Edition Standard finish) Available in: 20X8.5 | 20X9 | 20X10 | 20X11 | 20X12 STANCE SF01 Brushed Silver Brushed Titanium We're currently looking for customers to run these wheels at a discount in exchange for photos/review! Contact me at Jason@GetYourWheels.com with any interest and to check availability/fitments! |
Appreciate
0
|
04-16-2015, 05:44 PM | #54 |
Brigadier General
205
Rep 3,330
Posts |
We just shipped out this set of TE37SLs in Pressed Graphite in 19x9.5/10.5 with 235/255 Toyo Proxie 4+!
They'll be going on our customers G35 Coupe in Canada! Will post pics as soon as I get them Heres a shot of the Mystic Black Vorsteiner VFF103s in 20x10.5 Deep Concave F10 fitment. We'll be refinishing these in Brushed/Polished, should turn out gorgeous! |
Appreciate
0
|
04-23-2015, 07:03 PM | #55 |
Brigadier General
205
Rep 3,330
Posts |
Heres is the very first set of CF5s we just finished in upgraded Matte Antique Bronze finishing!
Love how these came out, they'll be going on a black C5 Corvette with Bronze Accents! |
Appreciate
0
|
04-23-2015, 07:08 PM | #56 |
Brigadier General
205
Rep 3,330
Posts |
Heres is the very first set of CF5s we just finished in upgraded Matte Antique Bronze finishing!
Love how these came out, they'll be going on a black C5 Corvette with Bronze Accents! |
Appreciate
0
|
04-30-2015, 07:10 PM | #57 |
Brigadier General
205
Rep 3,330
Posts |
For some reason I just cant stop staring at this set of Avant Garde F141s in Bespoke 3 Brushed Fuchsia!
First set in this finish, and they're definitely eye as catching as it gets! |
Appreciate
0
|
05-06-2015, 04:47 PM | #58 | |
Brigadier General
205
Rep 3,330
Posts |
Heres a set of F14s we had done in an upgraded custom Brushed Turquoise finish
Here they are installed on our customer's 370Z! Quote:
|
|
Appreciate
0
|
05-08-2015, 06:09 PM | #59 | |
Brigadier General
205
Rep 3,330
Posts |
Heres a set of Forgestar F14s installed in our popular upgraded Matte Candy Red powdercoat finish!
Thanks to Thirty_Seven for sharing Quote:
|
|
Appreciate
0
|
05-18-2015, 04:59 PM | #60 | |
Brigadier General
205
Rep 3,330
Posts |
Heres our customer's M235 running a unique and rare set of special ordered Enkei RS05RRs in 18x8 18x9 in Matte Gunmetal!
We paired these up with the Toyo R888s in 235/255 for an awesome dedicated track setup! Quote:
|
|
Appreciate
0
|
05-22-2015, 07:12 PM | #61 |
Brigadier General
205
Rep 3,330
Posts |
One of our customers had trouble deciding between the Matte Candy Red or the Matte Antique Bronze upgraded finishing for his M6 Grand Coupe... so he went with a set in each finish!
Matte Candy Red F14s in 20x9.5 20x11 SDC installed, wrapped in Pirelli P Zeros! You can never go wrong with black/red combo, aggressive! Up next is an identical set of Matte Antique Bronze F14s wrapped in Michelin PSS Installed: Which color combo do you like best? Which would you use for your daily driven set? Contact me at Jason@Getyourwheels.com or 562-219-2525 with any questions! |
Appreciate
0
|
06-01-2015, 06:53 PM | #62 | |
Brigadier General
205
Rep 3,330
Posts |
Just received these gorgeous photos of our customer's Model S running a set of 22x9 22x10.5 Forgestar F14s in Matte Black, we paired them with Nitto Invos for a perfect no rub fit!
Quote:
|
|
Appreciate
0
|
06-03-2015, 04:38 PM | #63 |
Brigadier General
205
Rep 3,330
Posts |
One of our F22 customers recently approached us looking for an 18" staggered set of wheels that could handle tires wider than the OEM 225/245 setup.
As many of you know, there are very few off the shelf options that offer a flush fitment on the F22 without spacers. (Forgestars are a good option but they require a 4-6 week build time) We do offer the M310s in 18x8 18x9 which fits perfectly with OEM tires, but if you want to go wider with 235/255 these aren't ideal. We did some research and were able to locate the Beyern Spartans which are available in 18x8.5 +40 18x9.5 +45 which is a perfect flush fitment for the F22! We paired them with 235/255 Hankook K120 EVO2s for flush fitment and no rubbing. These will also accommodate a drop with no rubbing! -Rotary Forged (Light/Strong) -BMW Specific fitment (Hubcentric and fits OEM BMW Centercaps) -IN STOCK ready to ship -Front and rear concave -Flush fitment with no spacers needed -Fits wider tires than OEM -Very reasonable price point Available in Matte Black, Silver, and Chrome! Here are the photos from our install! Car is on stock suspension Beyern offers a fitment for nearly every BMW application, contact me at Jason@GetYourWheels.com with any interest or questions! |
Appreciate
0
|
06-05-2015, 02:45 PM | #64 |
Brigadier General
205
Rep 3,330
Posts |
Finished up a set of 19x9.5 Deep Concave 19x11 SDC F14s for a G35Coupe in an upgraded Brushed Antique Copper finish!
This is the first set of F14s in this finish and I love how they came out! Here they are installed Contact me @ Jason@GetYourWheels.com with any questions! |
Appreciate
0
|
06-11-2015, 03:45 PM | #65 |
Brigadier General
205
Rep 3,330
Posts |
The rotary forged Rohana RF1s and RF2s are both now available in 20" fitments!
RF1 - 20x8.5/9/10/11 Rohana RF2 Here they are installed on our customer's Q50S in Brushed Titanium Contact me at Jason@GetYourWheels.com or 562-219-2525 with any questions or to place an order! |
Appreciate
0
|
06-16-2015, 06:24 PM | #66 | |
Brigadier General
205
Rep 3,330
Posts |
Here is a set of 22x10 F14s we built for our customer's brand new Cayenne Diesel in Matte Black
Quote:
We're also excited to share some of the first photos of the 19x10 CF5Vs in Super Deep Concave! Currently only 19x10 available, and limited inventory. The SDC wont fit all cars so contact me for the best recommended fitment for yours! |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|