Quote:
Originally Posted by GerryC
I would suspect a bad sensor, a broken sensor wire, or a bad connection to the sensor. If the system is saying the brake pads need replacing it's because it is sensing an open circuit in the sensor loop.
Gerry
|
Gerry,
Thanks for the suggestions. I wanted to confirm your suspicions and did a continuity test on the old and new sensors. The old one, as expected failed continuity from the two prongs in the connector. The new one passed, so that leads me to believe the sensor is functional. I reconnected the sensor and attempted a reset and the same failure occured. I am wondering if it is my reset process that is now the issue.