7. Clamp the hose, remove the two 10mm bolts (red arrows) and remove the coolant hose under the housing. This is needed to gain access to the oil filter housing bolt. Release the 2 upper and 1 lower bolt (green arrows) with an E12 Torx socket and remove the oil thermostat. Clean the surface that contacts the gasket. The blue arrows show the lower and upper oil filter housing bolts.
__________________
2016 340i XDrive, EBII/black, 6 MT, M Sport, Track Handling, Cold Weather, Tech, Lighting, Driver Assistance Plus.
2012 Z4 35i, ED 2/24/2012, Melbourne Red Metallic, Black Leather, Carbon Trim, 6MT, M Sport, CW, PP, PS, NAV, CA.
|