Quote:
Originally Posted by dmeerpa
I had the same issue, and I solved it via the expert mode.
In my case for the CTM module those 2 lines where not active, put them on active, and it should work. - CAS : FH_KOMFORTF_MIT_SUBST
- CTM : KOMFORT_SCHLIESS_FBD89
If it still doesn't work check those values as well via the expert mode:
CAS MODULE (set both of these lines to aktiv)
KOMFORTSCHLIESSUNG_FB
FH_KOMFORTF_MIT_SUBST
CTM MODULE (all of these lines need to be set to aktiv, some may already be set to aktiv!) I am not sure its the same with CVM module..
KOMFORT_OEFFNEN_FBD
KOMFORT_LADE_POSITION
KOMFORT_SCHLIESS_FBD
SCHEIBEN_ANHEB_OEFF_FBD
SCHEIBEN_ANHEB_SCHL_FBD
CAS : FH_KOMFORTF_MIT_SUBST
CTM : KOMFORT_SCHLIESS_FBD89
|
I did all that, it works although I have to hold the lock button for the mirrors to fold. Still, an improvement over can't do it via remote