[35i-Nut]

which hole are you running on the H&R sway ? , Ive been playing between middle and stiffest hole and settled on the middle as found the stiffest hole made the car a bit twitchy

I had no issue with getting adjustment , however I'm interested in what torque your rear sway bar bolts have been set too ?

The OEM end links are pushed onto the end of the rear OEM sway bar and in theory can rotate around the end but reality they are a pain to twist off

As you know the rear H&R sway are nut and bolted to the end links , Ive tightened mine up until the end link rubbers start to distort , Ive no idea if this is correct struggled to find info, interested in what you have done

Also , I'm on the verge of buying KW3's , Eibachs and H&R sways are a big improvement over stock with EDC but I'm still rolling around in my seat

Front end feels flat and tight , the rear end does not

Cant quite decide if its due to the SE seats being unsupportive or its the car rolling around at the rear!