Quote:
Originally Posted by RobbiZ4
Keep in mind, that the CTM is not very communicative. That is not a Carly issue. AFAIK, each stored error code from the CTM is always visible even with Carly. But, there exist several roof issues, which don't provide any error code. In rare situations, the CTM stores absolutely wrong codes, i.e. hall sensor, when a microswitch struggles!
Where are you from?
https://www.staiger-neuffen.de/bmw-z...ach-notdienst/ |
Hi - I am in Coventry, UK.
The roof is 95% closed, the trunk is closed perfectly but there is a 2cm gap between back roof and top roof, and a 2cm gap between top roof and windscreen. Also, the windows are fully OPEN so I am getting weather damage inside the car every day (even though I have covered the sides with plastic sheet).
I see two errors (out of a bigger list) from Carly that may be important:
Fault code: 00A670 Error fogging sensor 0xA670 / BSS error signal line BSS 0xA670
Fault code: 00A568 ID failure status hood / ID-failure status 27Eh top convertible
The fogging sensor seems fine in appearance.
Any ideas would be much appreciated! I need to get the windows raised as a matter of urgency.