Quote:
Originally Posted by cruisingdownthestreet
Is there anything where the windscreen shield latches onto on the roll bar cover in the way?
|
No. Let me show you a photo of the rear cover, from the inside. This will help.
If you have the convertible windscreen, you will need to unscrew the black convertible rail that is held to the outside of the silver hoops - two torx screws. But if you do not have it, there is nothing in the way.
From the photo, you can see that there are eight balls that simply slide in (with friction) to eight sockets. By starting at the bottom outside, you start to pry the lower one loose. This gives you leverage to pull apart the rest of them. Don't be afraid to use force, just don't use metal.
Hope this helps,
Filippo