Quote:
Originally Posted by rjahl
I have seen faulty motors kill relays. So cause and affect need to be established.
|
I thought about that too. But let's clarify: here is the workshop & repair manual:
Quote:
The temperature in the hydraulic pump is measured to avoid the pump
overheating during frequent use of the retractable hardtop. Two cables connect
the temperature sensor ground-free to the convertible top module. A line break
(open circuit) results in a fault code being entered in the fault code memory. At
from a temperature of 90°C, hardtop closing movement already started is
continued up to the secure end position. The movement of the retractable hardtop
is stopped immediately at a temperature of 105°C.
|
The relays should have be opened before the pump was dead...
----------
By the way, on the video, the relays is tagged 13A...
When i see salmon relays (exact same OEM reference) tagged with 73A.
Wtf?
RobbiZ4 How much your ones was tagged?