Quote:
Originally Posted by stormlv
Hey, somehow I missed your reply.
So I know that the reverse cam should fit, but the problem is that:
1) the camera only came with one light housing, not two, so if I replace one, the light color will be different between the two light housings
|
in my case, the new housing only contained the cam, so I moved the LED from the replaced one to the new with th cam
Quote:
Originally Posted by stormlv
Hey, somehow I missed your reply.
2) the camera will be off-center
|
not so much, that it would misguide you
Quote:
Originally Posted by stormlv
Hey, somehow I missed your reply.
3) (probably the least of an issue) I'd need to splice wires to get power to the new light housing.
|
the device, I installed, provides power for front and rear cam - check the video I link below from Dave
Quote:
Originally Posted by stormlv
Hey, somehow I missed your reply.
That said, do you have some pictures of how you did the routing?
It would really help
|
sorry, I don't - I used Dave's video to figure out how I wanted to do it
https://youtu.be/j-I2KSQxYb8