[jparnes1]

5. Release the hose clipped to the top of the fan shroud. Remove the 25T screw at the right upper corner of the fan. Release the electrical connector from the fan. While using a long screwdriver to disengage the retaining clip midway down the left side of the fan, pull the fan straight up and remove.
6. Cover the alternator with a rag and place more rags under the parts that will be removed next to catch the fluids. If you’re not draining the oil, put line clamps on the oil cooler lines. Remove the 13mm bolt under the oil cooler thermostat and pull the oil cooler pipes down to release. Each pipe fitting has an O ring that will need to be replaced and coated with oil before reconnecting the pipes.