Greetings all,
New to the forum and was wondering if anyone can guide me in solving in what I think is a communication issue. Thank you in advance!
Vehicle
BMW x5 E53 – 2003
I got a hold is ISTA an to see if I can solve, why I have Traction-ABS-Brake and Check Engine Lights are on. ABS module was rebuilt 4 months ago.
Items verified
- ISTA Communication setting on (COM 1)
Com 1 settings
Latency = 1
Speed - 115200
Fuses #2 and #52 (Diagnostics Plug), have are good.
K-DCAN – Tested.
ODB2 – Connector. Verified that pin 8 was connected and made a good connection to k+DCAN Cable.
INPA looks like it can read the engine
ISAT is not able to identify the vehicle or read the modules.
ISTA Messages- The Vehicle could not be identified Successfully. Check vehicle Interface and 'PAD Active.
- The Vehicle identification number could not be determine from the vehicle.
Not sure what next needs to be checked. please advise, thank you again.