IND | 3D Design and Stack gauge packages - New 2009 2010 BMW Z4

Andrew@IND · 06-16-2011, 07:35 PM

IND 3D Design Gauge pod packages

IND has installed a number of gauge packages for our clients, and in doing so has worked hard to optimize each install for a factory fit, finish, and functionality. It is from this experience that we are able to truly appreciate the thought and detail 3D Design has put forth in developing and producing their adapters. All 3D Design gauge pods are packaged with the requested adapters necessary for installation of the Stack gauges.

Stack Ltd has been at the forefront of Motorsport gauges and meters since the 1980s and continues to be an innovator to this day. Stack meters are among the most accurate available with impressive arrays of available features from datalogging outputs, peak recalls, warning sets, and even fan and pump controls built right into the gauge!

IND’s gauge package will include a full set of Stack gauges, a 3D Design gauge pod, and all the necessary adapters provided by 3D Design Japan.

For the E89 35i 3D Design offers fittings for oil pressure, oil temp, and water temp. For boost gauges all that is required is a vacuum line.

Please pm a IND representative for more information.

Andrew@IND · 06-24-2011, 08:23 AM

Stack 3300 oil pressure gauge (available in both bar and psi)

Andrew@IND · 07-08-2011, 06:06 PM

Andrew@IND · 08-03-2011, 10:56 AM

ST3500 in action!

///NWIE89 · 08-03-2011, 11:19 AM

how much do these packages go for? with a boost gauge, water temp, and exh temp

Andrew@IND · 08-09-2011, 09:43 AM

Update from the 3D Design North America E89

Team Plutonium · 09-01-2011, 10:11 PM

I can't wait for those!

Andrew@IND · 02-14-2012, 03:16 PM

Stack 3500 series

Andrew@IND · 03-07-2012, 04:25 PM

E89 gauge pods in stock!

Andrew@IND · 03-09-2012, 12:01 PM

1 gauge pod left! More leaving Japan in two weeks. Contact a representative for gauge pricing

Mr. ///M3 RD · 03-09-2012, 12:59 PM

Andrew, Just wondering here have you installed them on a M3 as well?

If so how long does it take to install?

Thanks,

Rolf

Andrew@IND · 03-09-2012, 05:52 PM

Quote:

Originally Posted by Alter Peter

Andrew, Just wondering here have you installed them on a M3 as well?

If so how long does it take to install?

Thanks,

Rolf

Yup, we have installed them on plenty of E9X M3's. Simply remove the center console and secure the gauge pod to the console from the underside with provided screws and fasteners. PM me with your email address and I will scan the instructions and send them over

regards,

Andrew@IND

Mr. ///M3 RD · 03-09-2012, 05:57 PM

Quote:

Originally Posted by Andrew@IND

Yup, we have installed them on plenty of E9X M3's. Simply remove the center console and secure the gauge pod to the console from the underside with provided screws and fasteners. PM me with your email address and I will scan the instructions and send them over

regards,

Andrew@IND

Thanks Andrew ... it was just a question at this time. It is on my wish list.

Regards,

Rolf

Andrew@IND · 03-27-2012, 12:41 PM

Stack gauge package going out to a lucky E89 owner

135i_zh · 01-11-2013, 02:09 PM

for E82/2008 to? shipping to Switzerland?
thx

Andrew@IND · 01-11-2013, 02:54 PM

Quote:

Originally Posted by 135i_zh

for E82/2008 to? shipping to Switzerland?
thx

Your account is too new for PM, please email us and include the gauges you are looking for.

info@ind-distribution.com

Constant.S · 01-11-2013, 09:08 PM

Hey Andrew, just a few questions. Does the set come complete with everything to install them and have them 100% functional? How hard is the installation? For a boost gauge is it hard to get the line in that position?
Also please PM me a quote for shipping this item to Europe, Greece.

Thanks

06-16-2011, 07:35 PM	#1
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	IND \| 3D Design and Stack gauge packages IND 3D Design Gauge pod packages IND has installed a number of gauge packages for our clients, and in doing so has worked hard to optimize each install for a factory fit, finish, and functionality. It is from this experience that we are able to truly appreciate the thought and detail 3D Design has put forth in developing and producing their adapters. All 3D Design gauge pods are packaged with the requested adapters necessary for installation of the Stack gauges. Stack Ltd has been at the forefront of Motorsport gauges and meters since the 1980s and continues to be an innovator to this day. Stack meters are among the most accurate available with impressive arrays of available features from datalogging outputs, peak recalls, warning sets, and even fan and pump controls built right into the gauge! IND’s gauge package will include a full set of Stack gauges, a 3D Design gauge pod, and all the necessary adapters provided by 3D Design Japan. For the E89 35i 3D Design offers fittings for oil pressure, oil temp, and water temp. For boost gauges all that is required is a vacuum line. Please pm a IND representative for more information. __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG
	Tweet

06-24-2011, 08:23 AM	#2
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	Stack 3300 oil pressure gauge (available in both bar and psi) __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

07-08-2011, 06:06 PM	#3
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	__________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

08-03-2011, 10:56 AM	#4
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	ST3500 in action! __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

08-09-2011, 09:43 AM	#6
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	Update from the 3D Design North America E89 __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

08-03-2011, 11:19 AM	#5
///NWIE89 Private Drives: 2011 Z4 sDrive35i Join Date: Jul 2011 Location: Crown Point, IN Posts: 73 iTrader: (0)	how much do these packages go for? with a boost gauge, water temp, and exh temp

09-01-2011, 10:11 PM	#7
Team Plutonium Major General Drives: 911 Join Date: Dec 2007 Location: Upstate Posts: 8,509 iTrader: (1)	I can't wait for those! __________________ Gone... ESS VT2-625 \| ESS Tune \| M24 Oil Cooler \| Brembo 380mm BBK \| Dinan 4.10 Diff \| KW Variant 3 Coilovers \| Dinan Camber Plates \| Dinan Strut Tower Braces \| Dinan X-Pipe \| Akrapovic Exhaust \| Vorsteiner GTS3 Bumper \| Varis System One Diffuser \| OEM Performance Spoiler \| Stack Gauges \| GTS Door Sills \| Volk TE37 \| Falken Azenis RT615K 275/315 \| Pulled Fenders \| Turner Stud Kit \| OMP ARS Racing Seats New: 991C2S

02-14-2012, 03:16 PM	#8
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	Stack 3500 series __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

03-07-2012, 04:25 PM	#9
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	E89 gauge pods in stock! __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

03-09-2012, 12:01 PM	#10
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	1 gauge pod left! More leaving Japan in two weeks. Contact a representative for gauge pricing __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

03-09-2012, 12:59 PM	#11
Mr. ///M3 RD Major General Drives: M3 Summer & C350 4MATIC Winter Join Date: May 2010 Location: GTA, Ontario - Canada Posts: 7,564 iTrader: (0) Garage List 2011 M3 Coupe e92 [3.00] 2011 Benz 350 4MATIC [1.00] 1969 Restored Merce ... [0.00] 1987 BMW 535is [0.50] Cars from the Past [1.50] The ///M3 Engine S65 [3.50]	Andrew, Just wondering here have you installed them on a M3 as well? If so how long does it take to install? Thanks, Rolf __________________ Cheers, Rolf-Dieter Life will take us to some interesting places, fortunately The ///M3 will too with a many of us know this very well ---> Click here for some good stuff I found

03-27-2012, 12:41 PM	#14
Andrew@IND Lieutenant Colonel Drives: BMW Join Date: Oct 2009 Location: Chicago Posts: 1,528 iTrader: (1)	Stack gauge package going out to a lucky E89 owner __________________ IND DISTRIBUTION \| 866.963.4520 \| IND STYLE \| EISENMANN BLOG

01-11-2013, 02:09 PM	#15
135i_zh Registered Drives: 135i Join Date: May 2010 Location: Zurich Posts: 3 iTrader: (0)	for E82/2008 to? shipping to Switzerland? thx

01-11-2013, 09:08 PM	#17
Constant.S Resistance is futile... Drives: BMW Z4 E89(N54) Porsche 997 4S Join Date: Nov 2010 Location: Greece/Canada Posts: 503 iTrader: (0)	Hey Andrew, just a few questions. Does the set come complete with everything to install them and have them 100% functional? How hard is the installation? For a boost gauge is it hard to get the line in that position? Also please PM me a quote for shipping this item to Europe, Greece. Thanks __________________ An ounce of performance is worth pounds of promises.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search