New 2009 2010 BMW Z4 - ZPOST
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Go Back   New 2009 2010 BMW Z4 - ZPOST > BMW Z4 Forum (E89) > Engine, Transmission, Exhaust, Drivetrain, ECU Software Modifications

Post Reply
 
Thread Tools Search this Thread
      02-13-2011, 10:47 PM   #1
shashi27
Private
1
Rep
84
Posts

 
Drives: 11 Z4 35is
Join Date: Jan 2011
Location: NJ, USA

iTrader: (0)

JB4 and DCI Installed on 35IS

Install for the cones took about 30mins. The JB4 took about 1 hour and 30 minutes. Probably more because this was my first time. I have to say the Z4 is a lot easier than the 335 video as the ECU is easily accesible.

I was only able to drive the car once but it was a rush. Burger Tuning says it takes a few runs for the ECU to adjust 100% so we will see how it is by the end of the week. Adjusting maps on the fly is a cool feature. My car is not modified so I really can only flip from map 0 and map 1. I'd like to try map 2 but it sounds like you need downpipes. I am also running on snow tires right now so I don't want to shred them.

Cheers.
Appreciate 0
      02-13-2011, 11:01 PM   #2
Constant.S
Resistance is futile...
Constant.S's Avatar
13
Rep
614
Posts

 
Drives: BMW Z4 E89(N54) Porsche 997 4S
Join Date: Nov 2010
Location: Greece/Canada

iTrader: (0)

Send a message via MSN to Constant.S Send a message via Skype™ to Constant.S
Congrats bro! Keep us updated
__________________
An ounce of performance is worth pounds of promises.
Appreciate 0
      02-13-2011, 11:11 PM   #3
teagueAMX
Colonel
teagueAMX's Avatar
United_States
32
Rep
2,086
Posts

 
Drives: Some are road worthy
Join Date: Apr 2009
Location: So Cal, USA

iTrader: (0)

Quote:
Originally Posted by shashi27 View Post
Install for the cones took about 30mins. The JB4 took about 1 hour and 30 minutes. Probably more because this was my first time. I have to say the Z4 is a lot easier than the 335 video as the ECU is easily accesible.

I was only able to drive the car once but it was a rush. Burger Tuning says it takes a few runs for the ECU to adjust 100% so we will see how it is by the end of the week. Adjusting maps on the fly is a cool feature. My car is not modified so I really can only flip from map 0 and map 1. I'd like to try map 2 but it sounds like you need downpipes. I am also running on snow tires right now so I don't want to shred them.

Cheers.
How do the JB4 numbers for the 35is stack up against the 35i?

Is there any difference?

The reason I ask is because Dinan's numbers were slightly different and for some reason he doesn't offer a Stage III for the 35is. I just wonder if BMWs tweaking the ECU for the 35is has an impact.
__________________
"Political correctness is a doctrine fostered by a delusional liberal minority and rabidly promoted by an unscrupulous mainstream media which holds forth the proposition that it is entirely possible to pick up a turd by the clean end".-- Unknown


Last edited by teagueAMX; 02-15-2011 at 12:59 AM.
Appreciate 0
      02-14-2011, 06:55 PM   #4
Alext
Colonel
No_Country
42
Rep
2,027
Posts

 
Drives: B M W
Join Date: Apr 2008
Location: Everest

iTrader: (2)

The JB4 OVERRIDES the stock ECU programming - it is a Piggyback system. So it doesnt matter if you have a 35i or 35is.

Now on map 1 there isn't a HUGE difference between the stock 340HP and the JB4 tune which I estimate provides around 350-360HP at the engine PEAK....maybe around what 330RWHP.

The JB4 on map1 targets around 13psi, which is basically what the 35is targets in the midrange then tapers off significantly to redline. This is where the JB4 will make the most difference.

One other thing - I would be wary of running high boost/torque on the DCT transmission...

How do the DCI's sound mated with the Z4+ DCT? I only ever use them on a manual 135i.

Last edited by Alext; 02-14-2011 at 07:02 PM.
Appreciate 0
      02-14-2011, 09:07 PM   #5
Constant.S
Resistance is futile...
Constant.S's Avatar
13
Rep
614
Posts

 
Drives: BMW Z4 E89(N54) Porsche 997 4S
Join Date: Nov 2010
Location: Greece/Canada

iTrader: (0)

Send a message via MSN to Constant.S Send a message via Skype™ to Constant.S
Quote:
Originally Posted by Alext View Post
One other thing - I would be wary of running high boost/torque on the DCT transmission...
The GETRAG Powershift® 7DCI600 Transmission that BMW uses for our cars has a Torque Capacity of 600 Nm so it wont be a problem running high boost especially on the stock turbos.
__________________
An ounce of performance is worth pounds of promises.
Appreciate 0
      02-14-2011, 09:39 PM   #6
Alext
Colonel
No_Country
42
Rep
2,027
Posts

 
Drives: B M W
Join Date: Apr 2008
Location: Everest

iTrader: (2)

Yes this is correct. It is apparently rated at 600nm, but perhaps I should have made myself more clear - the reason why I said to be 'wary' was that not many have really tested the fragility/limits of the DCT day-to-day in the real world (at least that I have personally read about)...I would actually like to see some examples of real world testing on high boosted DCT applications that are exceeding the 600nm rating.
Appreciate 0
      02-14-2011, 10:15 PM   #7
Constant.S
Resistance is futile...
Constant.S's Avatar
13
Rep
614
Posts

 
Drives: BMW Z4 E89(N54) Porsche 997 4S
Join Date: Nov 2010
Location: Greece/Canada

iTrader: (0)

Send a message via MSN to Constant.S Send a message via Skype™ to Constant.S
I dont think you will find alot of cars out there exceeding 550/570nm. Most (stage2) tunes for our car wont give you more than 530 to 550nm (on stock turbos that is). So talking about 600nm would be talking about upgraded turbos and pushing close to 19/20psi (thats the max PSI you can go, limited by the fueling system of the N54). Getrac has rated the transmission to 600nm max always being conservative for everyday applications just like all OEM manufacturers, tuners have stated that this transmission is good for about of 700nm of Torque. Now if you're talking about Nitrous then its a different topic but we ARE talking about the JB4 and average dyno numbers on 15.5 with that specific tune, with 92 Octane fuel Full bolt on's and meth give around 430nm of Torque which is more than safe and thats directly quoted by a dynograph from Burger Motorsports JB4 equipped N54 car
__________________
An ounce of performance is worth pounds of promises.

Last edited by Constant.S; 02-14-2011 at 10:25 PM.
Appreciate 0
      02-17-2011, 02:30 AM   #8
parnassus
Private
parnassus's Avatar
Australia
0
Rep
74
Posts

 
Drives: Z4 sDrive35i DCT
Join Date: Aug 2009
Location: Sydney, Australia

iTrader: (0)

Send a message via MSN to parnassus
Actually I emailed Getrag three days ago because I've been hearing conflicting numbers about the DCT's torque capacity. I was told that the DCT gearbox used in the sDrive35i has a torque capacity of 500Nm.

Where did you get your 600Nm figure from?
Appreciate 0
      02-17-2011, 03:47 AM   #9
Constant.S
Resistance is futile...
Constant.S's Avatar
13
Rep
614
Posts

 
Drives: BMW Z4 E89(N54) Porsche 997 4S
Join Date: Nov 2010
Location: Greece/Canada

iTrader: (0)

Send a message via MSN to Constant.S Send a message via Skype™ to Constant.S
Quote:
Originally Posted by parnassus View Post
Actually I emailed Getrag three days ago because I've been hearing conflicting numbers about the DCT's torque capacity. I was told that the DCT gearbox used in the sDrive35i has a torque capacity of 500Nm.

Where did you get your 600Nm figure from?
http://www.getrag.de/en/252

Just the official website and the product data and my BMW mechanic, take a look at the specs and Max torque capacity.
Except if they are lying on their website that is.
__________________
An ounce of performance is worth pounds of promises.

Last edited by Constant.S; 02-17-2011 at 04:03 AM.
Appreciate 0
      02-21-2011, 07:05 AM   #10
dcs2k
Lieutenant
15
Rep
440
Posts

 
Drives: E92 M3
Join Date: Aug 2009
Location: Singapore

iTrader: (0)

Will you be keen to do some data log on your car with the jb4? I'm interested to see what kind of difference the same car with different mods will have.

On running the dct gearbox with more power, I'm not worried for the dct gearbox at all, been running close to 19psi for the longest while without any issue. I I'll be very concerned especially when it comes to doing launching through. Anyone that followed my other thread will hear how I broke the rear shaft and prod shaft bearings. I will be ordering the rob beck bigger turbos and will report how the car takes it .
Appreciate 0
      02-27-2011, 01:48 PM   #11
shashi27
Private
1
Rep
84
Posts

 
Drives: 11 Z4 35is
Join Date: Jan 2011
Location: NJ, USA

iTrader: (0)

Quote:
Originally Posted by sg-e89 View Post
Will you be keen to do some data log on your car with the jb4? I'm interested to see what kind of difference the same car with different mods will have.

On running the dct gearbox with more power, I'm not worried for the dct gearbox at all, been running close to 19psi for the longest while without any issue. I I'll be very concerned especially when it comes to doing launching through. Anyone that followed my other thread will hear how I broke the rear shaft and prod shaft bearings. I will be ordering the rob beck bigger turbos and will report how the car takes it .
Sorry. Not really sure what you mean by data log. If it isn't something that will abuse the car and is not too time consuming I would be happy to assist. Thanks.
Appreciate 0
      06-23-2011, 09:25 PM   #12
pcockley
Banned
21
Rep
1,732
Posts

 
Drives: 335
Join Date: Apr 2011
Location: sydney

iTrader: (1)

g'day chaps, i was wondering if anyone knew if i can get a jb4 in australia?
Appreciate 0
      06-24-2011, 01:54 AM   #13
al1
Private
3
Rep
86
Posts

 
Drives: z4 35i
Join Date: Aug 2010
Location: Istanbul / Turkey

iTrader: (0)

Quote:
Originally Posted by pcockley View Post
g'day chaps, i was wondering if anyone knew if i can get a jb4 in australia?

I ordered their intake to Turkey and I got it only in a week. So I guess you can directly order it from their website. Burgermotorsports.com
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 11:05 AM.




zpost
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST