|
|
05-11-2016, 06:29 PM | #1 |
First Lieutenant
68
Rep 378
Posts |
AD-E innercooler, CSF rad, VTT outlets other goodies
this AD-Eng innercooler is massive! my IATs were 180 at the last no fly zone, so this should help. Looking at an oil cooler next if anyone has any recommendations on what they use...
__________________
2011 BMW Z4 35i | FBO | VTT Stg 2+ (EK, 20T clipped)| Motiv PI| Motiv Tuned | Fuel-IT Stg 2 + inline fuel pump | Spec Stg 3+ clutch | MFactory flywheel | 606whp 575Lbs |
|
05-12-2016, 10:37 AM | #2 |
Private
9
Rep 81
Posts |
intercooler looks massive ! , any install pics ?
Not sure if the likes of STETT will fit ? http://www.shop.stettperformance.com...8&categoryId=2 |
Appreciate
0
|
05-12-2016, 03:44 PM | #3 |
Captain
213
Rep 887
Posts |
So you went with the VTT outlets??
What do you think, and how was the fit?
__________________
GC LITES / BQ TUNE / MHD / FUEL IT BT ECA / WALBRO 525 LPFP / KW V3 / E9X M3 CONTROL ARMS / TURNER REAR CAMBER ARMS / RE BUSHINGS / H&R SWAYS / LUXON STRUTBAR / VRSF 7.5" FMIC / ER CP / TIAL BOV / VTT IN/OUTLETS / AFE PRO5R INTAKE / AR C.L. DP / BMS OCC / RB PVC / CF LIP + SIDE + SPOILER + DIFFUSER / IND REFLECTORS / BLK GRILLS / STUBBY / PB BBK / Forgestar F14 F: 19x9 et35 R: 19x10 et38/ Michelin PSS F: 245/35/19 R: 275/30/19
|
Appreciate
0
|
05-12-2016, 06:16 PM | #4 |
First Lieutenant
68
Rep 378
Posts |
none of it is installed yet, its going in now. it will be a few days. i'll post some updates once its all in.
the IC is rated at 1000hp, so its huuuugeee. much bigger cubic inch wise over the Stett. i looked at the Stett, but it wasnt going to meet my hp goals. It will take some cutting to make fit, its the same IC the Sonic MS Motiv 900 single turbo runs.
__________________
2011 BMW Z4 35i | FBO | VTT Stg 2+ (EK, 20T clipped)| Motiv PI| Motiv Tuned | Fuel-IT Stg 2 + inline fuel pump | Spec Stg 3+ clutch | MFactory flywheel | 606whp 575Lbs |
|
Appreciate
0
|
05-30-2016, 11:28 PM | #5 |
First Lieutenant
68
Rep 378
Posts |
all installed. now i just need to pick up the car and drive it lol.
been out in CA for Bimmerfest. The cold side on the FMIC had to be modified to fit the Z4 piping. also installed KW v3's and had them corner balanced
__________________
2011 BMW Z4 35i | FBO | VTT Stg 2+ (EK, 20T clipped)| Motiv PI| Motiv Tuned | Fuel-IT Stg 2 + inline fuel pump | Spec Stg 3+ clutch | MFactory flywheel | 606whp 575Lbs |
|
Appreciate
1
|
05-31-2016, 11:06 AM | #7 |
First Lieutenant
68
Rep 378
Posts |
thanks!
oil cooler, thermostat delete, M3 control arms, bushings, 335is guibo, LSD. wrap maybe... depends on how broke i am after all this lol.
__________________
2011 BMW Z4 35i | FBO | VTT Stg 2+ (EK, 20T clipped)| Motiv PI| Motiv Tuned | Fuel-IT Stg 2 + inline fuel pump | Spec Stg 3+ clutch | MFactory flywheel | 606whp 575Lbs |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|