|
|
08-24-2017, 12:02 PM | #1 |
First Lieutenant
41
Rep 312
Posts |
MOST port location
Mine is 2011 BMW Z4 35i.
I know the location of OBD port. Where is MOST port located ? Any picture of its location and how it looks like will help. Thanks ! |
08-24-2017, 03:12 PM | #3 |
First Lieutenant
41
Rep 312
Posts |
I did google ... some people say it is next to OBD port. Some say it is below the glove compartment. I couldn't find it. So posted here.
What is it ? It is "Media Oriented Systems Transport", used for programming and/or diagnosis. |
Appreciate
0
|
08-24-2017, 04:26 PM | #4 |
Lieutenant
64
Rep 412
Posts |
I was lost for that too when I did the coding of my car...The most is under the part number 3. You have to associate the 2 cable of the most as one as one so you can plug your Icom if it s the goal here.
__________________
BMW M5 ZCP and M4 ZCP. BMW 540i G30 stage 2 with KW street confort, Wagner DP, Remus catback, M sport brakes 395mm front and 385mm rear. MHD tune.
|
Appreciate
1
tomvleeuwen6.00 |
08-24-2017, 04:38 PM | #5 |
Lieutenant
162
Rep 561
Posts |
#3 exists on both driver and passenger ends of the dashboard. I pulled the passenger side for my stereo install, but thought I'd post this photo here as it might help. It simply pulls off with a yank.
Filippo
__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport. |
Appreciate
1
tomvleeuwen6.00 |
08-24-2017, 04:48 PM | #6 |
Lieutenant
64
Rep 412
Posts |
Yep you re right Filippo. The MOST is on the driver side
__________________
BMW M5 ZCP and M4 ZCP. BMW 540i G30 stage 2 with KW street confort, Wagner DP, Remus catback, M sport brakes 395mm front and 385mm rear. MHD tune.
|
Appreciate
0
|
08-24-2017, 07:43 PM | #7 |
Captain
90
Rep 745
Posts |
|
Appreciate
0
|
08-24-2017, 09:07 PM | #8 |
Lieutenant
162
Rep 561
Posts |
Stands for Media Oriented Standard Transport.
Yes it is not on the passenger side - I showed that photo only so folks could see that the plate is a 3-tab pull. It's the same on the driver side. Filippo
__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport. |
Appreciate
0
|
08-25-2017, 04:06 PM | #10 |
Lieutenant
162
Rep 561
Posts |
Yep. Just pop it off.
Filippo
__________________
2011 35i MT Atacama ... lots of bits. Full Öhlins TTX custom suspension. Build thread.
Build sheet. Currently finishing suspension, fuel, ignition system with Barry Battle @ 3DMMotorsport. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|