|
|
12-18-2013, 07:47 AM | #1 |
Lieutenant
54
Rep 546
Posts |
AR Design Oil Catch Can e89 fitted
Up for sale my AR Design OCC in mint condition mounted in my Z4 for 1 year and having covered 7.000km. All fitting hardware of course included. As you can see I had it mounted just below the windshield tank, it collected approximately a nice dose of espresso and the inlet pipe was super clean due to the 5 micron filter it uses. Throttle body was bone dry as well. Reason for selling is reverting back to stock. Price for the kit is 125 euros or 170$ INCLUDING WORLDWIDE DELIVERY no matter where you 're located. Thanks for watching Last edited by jannisa; 02-09-2014 at 09:50 AM.. |
12-18-2013, 07:51 PM | #3 |
Lieutenant
54
Rep 546
Posts |
It comes with a bracket that you can attach with zip ties on the diagonal upper (black) ''sways''.
But in the area beneath the windshield tank there are several rubber caps. You can choose to trim a small 7mm hole in one of them (2 min job) and the particular occ has a nipple at the bottom for flush purposes which fits and secures the can in the hole just fine. I had it placed in that location because it's that much cooler there than in any other place near the engine. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|