BMW - screen removal

[bimmer_yu]

Hello,

Like my BMW Z4 35i but recently I noticed some issues with CIC screen. Everything works perfectly appart from there were some scratches and screen become squeeky when opens and closes.

I tried to fix scratches by using Novus plastic polisher and I am very happy with the results but it's impossible to get to the corners properly without damaging the frame... Basically I removed anti-clare coating (not a big deal even at sunlight) but couldn't reach to the corners. In oder to do a proper job here I feel like I need to remove the screen, dissasemble it and then finish with Novus and seal everything with non-glare screen protector.

I mean I already did all that, results are excelent but as I couldnt reach corners screen protector doesnt stick in the corners properly. At the same time I want to put some silicone lubricant in order to fix sqeeky screen...

To make long story shorter - how to remove screen and dissasemble it?

[bimmer_yu]

Managed to do it. Its not that complicated.

These are the steps:

Remove trim, remove front vents, remove front speaker grill -> you get access to the 4 screws that hold screen in place.

Screen is Sharp LQ088K9LA02 and its replaceable. I did mine with low-speed Dremel and put custom-cut AG screen protector over it.

A lot of dust, insects etc got into folding mechanism. Afrer cleaning it and lube it with silicone its not sqeeky anymore.

[LOKSIM]

Hi, My Z4 is 2.3i the LCD screen protective layer crack, need to change, which is the model LQ088K9LA01/02 suitable ? appreciate your advice