Custom tune with WedgePerformance starts tomorrow.

Lambobimmer · 01-01-2015, 07:34 PM

I have been running a PTF custom 93 tune and E50 tune for the past 8 months. I have been very happy with the Dzenno's tunes but I want to give Ken at WedgePerformance a shot of tuning my Z4. I will post some dyno results once Ken gets the tune dialed in.

Zteve · 01-01-2015, 08:14 PM

Good luck, can't wait to see the results!

jts1981 · 01-02-2015, 04:41 PM

Good luck!

+ 100 on the results!

Bob20124 · 01-02-2015, 05:17 PM

I'd love to know your PTF Dyno #s verses Wedge Looking to do PTF after LSD install.

jts1981 · 01-09-2015, 01:22 PM

Any news?

Lambobimmer · 01-09-2015, 01:32 PM

Still working on it. It has been too cold to log so I haven't even gotten their initial tune loaded on my car yet. I am going to try this weekend.

RobC2 · 01-09-2015, 04:51 PM

Also curious how this will turn out. Good luck!

Ramjet · 01-10-2015, 02:01 AM

You won't be sorry, I'm very happy with the performance and with the support!

Lambobimmer · 01-10-2015, 02:23 PM

First Wedge Map and previous PTF 93 Map. Both logs were done on same stretch of road and in the same gear.

Wedge updated my map based on my first log and I will try to get out again this weekend and run another log.

jts1981 · 01-10-2015, 03:56 PM

Am I reading correctly, PTF tune was 380, Wedge is 418! That's quite a big jump. Is that @ the wheels?

Lambobimmer · 01-10-2015, 04:51 PM

Yes, Virtual Dyno measures at the wheels. Wedge is still working on the map and I have another one to run but we are getting close. Both maps are on 93 octane.

Very happy so far.

jts1981 · 01-10-2015, 06:57 PM

Wow!!! Thats awesome, congratz man!

spence88mph · 01-10-2015, 10:49 PM

Hey limbobimmer, are you loading this through a JB4, do you have any other mods? Excuse my newbiness, I'm just about to start the mod path...

Lambobimmer · 01-19-2015, 04:30 PM

I have been working with Wedge over the past few weeks and we are on version 5 on a 93 octane map. It feels very strong and runs super smooth. Here is my most recent log:

http://www.datazap.me/u/lamboworld/b...=0&data=2-7-19

spence88mph · 01-19-2015, 04:35 PM

Damn, how accurate is virtual dyno? It must not just feel strong, 400 at the wheels must be very quick. I just this second got an email from Wedge, can't wait!

Lambobimmer · 01-19-2015, 04:42 PM

Quote:

Originally Posted by spence88mph

Damn, how accurate is virtual dyno? It must not just feel strong, 400 at the wheels must be very quick. I just this second got an email from Wedge, can't wait!

It is fairly accurate if you log correctly. I am not so concerned about numbers and I use it more for the graphs but in my experience it is usually within 10 hp up or down.

RobC2 · 01-19-2015, 05:16 PM

Very nice results. I have begun e-mailing with them to hopefully get this started soon. Need to find some time to log now.

Lurcher · 01-20-2015, 08:10 AM

States Gear:3 - though for dyno pulls we needed to use 4th gear?

VMRWheels · 01-20-2015, 01:10 PM

Wow, awesome numbers!

Lambobimmer · 01-20-2015, 05:25 PM

Quote:

Originally Posted by Lurcher

States Gear:3 - though for dyno pulls we needed to use 4th gear?

Results should not be much different because you can choose the gearing on the VD.

nicknaz · 01-21-2015, 02:33 PM

nice #s on 93 octane!

Any time slips yet ?

Hujan · 01-21-2015, 02:58 PM

I'm curious how you use Virtual Dyno. Do you download it to your wireless device, then plug the device into your OBD2? Or do you log with, for example your AccessPort, then send that log data to the Virtual Dyno app?

01-01-2015, 07:34 PM	#1
Lambobimmer Major 292 Rep 1,473 Posts Drives: 2022 X3 M40i, 2018 TTRS Join Date: Jan 2010 Location: Tarheel iTrader: (14)	Custom tune with WedgePerformance starts tomorrow. I have been running a PTF custom 93 tune and E50 tune for the past 8 months. I have been very happy with the Dzenno's tunes but I want to give Ken at WedgePerformance a shot of tuning my Z4. I will post some dyno results once Ken gets the tune dialed in.
	Appreciate 0 Tweet Quote

01-01-2015, 08:14 PM	#2
Zteve Private 46 Rep 70 Posts Drives: Z4 sdrive35i Join Date: Apr 2009 Location: Indiana iTrader: (0)	Good luck, can't wait to see the results!
	Appreciate 0 Quote

01-02-2015, 04:41 PM	#3
jts1981 Captain 212 Rep 887 Posts Drives: n54 Join Date: Dec 2012 Location: NYC iTrader: (0)	Good luck! + 100 on the results!
	Appreciate 0 Quote

01-02-2015, 05:17 PM	#4
Bob20124 Retired and Enjoying it 52 Rep 170 Posts Drives: 2011 Z4 35i Alpine White 6MT Join Date: Jun 2013 Location: VA iTrader: (0)	I'd love to know your PTF Dyno #s verses Wedge Looking to do PTF after LSD install. __________________ 2011 35i BMS High & Low side OCC, Custom tune, CDV delete, Eldor coils, ER Charge Pipe w/Tial BOV, ER Comp. FMIC, K&N drop in,40W LED Halo, LCI side markers, M-Factory LSD, NGK plugs, Racing Dynamics strut brace, Stubby, Windrestrictor
	Appreciate 0 Quote

01-09-2015, 01:22 PM	#5
jts1981 Captain 212 Rep 887 Posts Drives: n54 Join Date: Dec 2012 Location: NYC iTrader: (0)	Any news?
	Appreciate 0 Quote

01-09-2015, 01:32 PM	#6
Lambobimmer Major 292 Rep 1,473 Posts Drives: 2022 X3 M40i, 2018 TTRS Join Date: Jan 2010 Location: Tarheel iTrader: (14)	Still working on it. It has been too cold to log so I haven't even gotten their initial tune loaded on my car yet. I am going to try this weekend.
	Appreciate 0 Quote

01-09-2015, 04:51 PM	#7
RobC2 Lieutenant 312 Rep 520 Posts Drives: different makes and models. Join Date: Aug 2013 Location: NC iTrader: (0)	Also curious how this will turn out. Good luck!
	Appreciate 0 Quote

01-10-2015, 02:01 AM	#8
Ramjet Private 9 Rep 85 Posts Drives: z4 35i Join Date: Dec 2011 Location: Brisbane, Australia iTrader: (0)	You won't be sorry, I'm very happy with the performance and with the support!
	Appreciate 0 Quote

01-10-2015, 02:23 PM	#9
Lambobimmer Major 292 Rep 1,473 Posts Drives: 2022 X3 M40i, 2018 TTRS Join Date: Jan 2010 Location: Tarheel iTrader: (14)	First Wedge Map and previous PTF 93 Map. Both logs were done on same stretch of road and in the same gear. Wedge updated my map based on my first log and I will try to get out again this weekend and run another log. Attached Images Last edited by Lambobimmer; 01-10-2015 at 02:29 PM..
	Appreciate 0 Quote

01-10-2015, 03:56 PM	#10
jts1981 Captain 212 Rep 887 Posts Drives: n54 Join Date: Dec 2012 Location: NYC iTrader: (0)	Am I reading correctly, PTF tune was 380, Wedge is 418! That's quite a big jump. Is that @ the wheels?
	Appreciate 0 Quote

01-10-2015, 04:51 PM	#11
Lambobimmer Major 292 Rep 1,473 Posts Drives: 2022 X3 M40i, 2018 TTRS Join Date: Jan 2010 Location: Tarheel iTrader: (14)	Yes, Virtual Dyno measures at the wheels. Wedge is still working on the map and I have another one to run but we are getting close. Both maps are on 93 octane. Very happy so far.
	Appreciate 0 Quote

01-10-2015, 06:57 PM	#12
jts1981 Captain 212 Rep 887 Posts Drives: n54 Join Date: Dec 2012 Location: NYC iTrader: (0)	Wow!!! Thats awesome, congratz man! __________________ GC LITES / BQ TUNE / MHD / FUEL IT BT ECA / WALBRO 525 LPFP / KW V3 / E9X M3 CONTROL ARMS / TURNER REAR CAMBER ARMS / RE BUSHINGS / H&R SWAYS / LUXON STRUTBAR / VRSF 7.5" FMIC / ER CP / TIAL BOV / VTT IN/OUTLETS / AFE PRO5R INTAKE / AR C.L. DP / BMS OCC / RB PVC / CF LIP + SIDE + SPOILER + DIFFUSER / IND REFLECTORS / BLK GRILLS / STUBBY / PB BBK / Forgestar F14 F: 19x9 et35 R: 19x10 et38/ Michelin PSS F: 245/35/19 R: 275/30/19
	Appreciate 0 Quote

01-10-2015, 10:49 PM	#13
spence88mph New Member 2 Rep 19 Posts Drives: Z435is Join Date: Feb 2014 Location: Melbourne, Australia iTrader: (0)	Hey limbobimmer, are you loading this through a JB4, do you have any other mods? Excuse my newbiness, I'm just about to start the mod path...
	Appreciate 0 Quote

01-19-2015, 04:30 PM	#14
Lambobimmer Major 292 Rep 1,473 Posts Drives: 2022 X3 M40i, 2018 TTRS Join Date: Jan 2010 Location: Tarheel iTrader: (14)	I have been working with Wedge over the past few weeks and we are on version 5 on a 93 octane map. It feels very strong and runs super smooth. Here is my most recent log: http://www.datazap.me/u/lamboworld/b...=0&data=2-7-19 Attached Images
	Appreciate 0 Quote

01-19-2015, 04:35 PM	#15
spence88mph New Member 2 Rep 19 Posts Drives: Z435is Join Date: Feb 2014 Location: Melbourne, Australia iTrader: (0)	Damn, how accurate is virtual dyno? It must not just feel strong, 400 at the wheels must be very quick. I just this second got an email from Wedge, can't wait!
	Appreciate 0 Quote

01-19-2015, 05:16 PM	#17
RobC2 Lieutenant 312 Rep 520 Posts Drives: different makes and models. Join Date: Aug 2013 Location: NC iTrader: (0)	Very nice results. I have begun e-mailing with them to hopefully get this started soon. Need to find some time to log now.
	Appreciate 0 Quote

01-20-2015, 08:10 AM	#18
Lurcher Captain 75 Rep 679 Posts Drives: 2012 z4 Join Date: May 2013 Location: Buford, GA (right side of ATL) iTrader: (0)	States Gear:3 - though for dyno pulls we needed to use 4th gear?
	Appreciate 0 Quote

01-20-2015, 01:10 PM	#19
VMRWheels General 2038 Rep 25,989 Posts Drives: BMW Join Date: Jun 2007 Location: Anaheim, CA iTrader: (4) Garage List 2013 BMW M3 [10.00] 2015 BMW M4 [0.00] 2013 BMW F30 [0.00] 2014 BMW F22 [0.00] 2013 BMW F06 [0.00]	Wow, awesome numbers! __________________ VMR\|Wheels \| 714.442.7916 \| sales@velocitymotoring.com \| www.velocitymotoring.com \| facebook \| flickr \| Instagram
	Appreciate 0 Quote

01-21-2015, 02:33 PM	#21
nicknaz Lieutenant General 3187 Rep 10,509 Posts Drives: C6Z Join Date: May 2008 Location: NorCal iTrader: (0)	nice #s on 93 octane! Any time slips yet ?
	Appreciate 0 Quote

01-21-2015, 02:58 PM	#22
Hujan Brigadier General 569 Rep 3,742 Posts Drives: M3 Join Date: Apr 2013 Location: . iTrader: (16)	I'm curious how you use Virtual Dyno. Do you download it to your wireless device, then plug the device into your OBD2? Or do you log with, for example your AccessPort, then send that log data to the Virtual Dyno app?
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search