Dyno pull yesterday

Lurcher · 02-02-2014, 10:57 AM

303.5 hp @5400 rpm torque 348.7 @ 3450 rpm

Was within .5 hp of the other z4 2 hrs earlier. Done at 47 degrees F.

Nice to know its doing what it should...

nicknaz · 02-02-2014, 03:37 PM

is that at the wheels or adjusted to be at the crank?

ManiacGT · 02-03-2014, 03:57 AM

If it's a stock 35i car it will be an adjusted at the crank figure. Mine was similar on a rolling road.

Z435_2010 · 02-03-2014, 04:37 AM

Wow, the measured torque figure is usefully higher than the spec.

GreggM · 02-06-2014, 10:32 PM

What model is that 35i or is?

vasmir · 02-06-2014, 11:12 PM

Quote:

Originally Posted by Z435_2010

Wow, the measured torque figure is usefully higher than the spec.

Lurcher · 02-07-2014, 07:19 PM

Quote:

Originally Posted by GreggM

What model is that 35i or is?

"Just" an i.....

02-02-2014, 10:57 AM	#1
Lurcher Captain 75 Rep 679 Posts Drives: 2012 z4 Join Date: May 2013 Location: Buford, GA (right side of ATL) iTrader: (0)	Dyno pull yesterday - stock 303.5 hp @5400 rpm torque 348.7 @ 3450 rpm Was within .5 hp of the other z4 2 hrs earlier. Done at 47 degrees F. Nice to know its doing what it should...
	Appreciate 0 Tweet Quote

02-02-2014, 03:37 PM	#2
nicknaz Lieutenant General 3187 Rep 10,509 Posts Drives: C6Z Join Date: May 2008 Location: NorCal iTrader: (0)	is that at the wheels or adjusted to be at the crank?
	Appreciate 0 Quote

02-03-2014, 03:57 AM	#3
ManiacGT Major 85 Rep 1,448 Posts Drives: Z4 sDrive 35i Join Date: Jan 2011 Location: Manchester, UK iTrader: (0)	If it's a stock 35i car it will be an adjusted at the crank figure. Mine was similar on a rolling road.
	Appreciate 0 Quote

02-03-2014, 04:37 AM	#4
Z435_2010 New Member 1 Rep 19 Posts Drives: 2007 335i ZSP Join Date: Aug 2012 Location: SF Bay Area iTrader: (1)	Wow, the measured torque figure is usefully higher than the spec.
	Appreciate 0 Quote

02-06-2014, 10:32 PM	#5
GreggM Registered 0 Rep 4 Posts Drives: 2011 Z4 35i Join Date: Feb 2014 Location: Monterey, CA iTrader: (0)	What model is that 35i or is?
	Appreciate 0 Quote