2013 Z4 Trouble Codes help!

[Djflacoent]

Originally Posted by B21

Here you go..

Thank you, sorry I might be incorrect on this part but what I understand those wires are for the dimmers and singles they go connect to behide the box?

[Djflacoent]

My 3 main issue now is the 31e9 radiator fan line disconnect, passenger door which might be the doorlock actuator and the idrive console not working. I also have a 93b2 safety battery terminal which not sure where to start on that.

[Marcoose]

Originally Posted by Djflacoent

I finally manage to get the trunk working and the convertible working again

What was the problem ?

[B21]

Originally Posted by Djflacoent

Thank you, sorry I might be incorrect on this part but what I understand those wires are for the dimmers and singles they go connect to behide the box?

Electronic damper control if fitted and gear indicator light if fitted

[Djflacoent]

Originally Posted by Marcoose

What was the problem ?

Sorry for the late reply. I checked the fuse and I also ran a scan on the bmw. The scan was showing right microswitch was messed up. I disconnected the right microswitch and get a full system scan again and it cleared out the code. After that my trunk started to work and my hardtop started to work again.

[Djflacoent]

Originally Posted by B21

Electronic damper control if fitted and gear indicator light if fitted

thank you I'm going to take a look for that.

[Djflacoent]

Quick full update for today:
I double checked all the fuses again and I found some that was messing. I manage to get the passenger door open now and the middle console working. I also manage to get the engine fan working again (so glad). It seems everything is coming along well so far. I think now I just need to fix the Idrive and install the new microswitch.

[Djflacoent]

Originally Posted by B21

Electronic damper control if fitted and gear indicator light if fitted

I'm going to see where these wires location go so I can reconnect them.