|
|
08-03-2017, 01:39 PM | #1 |
Lieutenant
149
Rep 510
Posts |
Anyone able to help with Carly fault codes?
Evening all,
I've just done a fault code check with Carly and the following fault codes came up.... ABS / DSC / Brake: Dynamische Stabilitaets Kontrolle / DSC :Rotation rate sensor / Gyroscope / Speed sensor right front line fault Code: 005EAC :Lateral acceleration sensor Code: 005E96 Systems: Junction Box Passenger / Beifahrer Heated seat driver Code: 00A6E0 Now the drivers heated seat doesn't work and never has the time I've owned it, the fuse is fine and as the heater elements are in two sections I'd take a guess at the module under the seat may be at fault, I'll have to investigate this with my DMM. Now for the ABS codes, I've tried to find this on 'tinternet but I'm not really coming up with anything positive. Can any of you point me in the right direction? I'm not one for sitting on my backside and handing over loads of "hard-earned" when I can do it myself (if I can!!) so if anyone can help out it'll be appreciated. TIA
__________________
Dave
2011, E89 23i, Grey with Red leather.... relatively basic (getting less and less basic with every new retrofit)! My Z4 E89 YouTube channel... https://www.youtube.com/channel/UCtt...0vHFUQnoEvKB2Q |
08-03-2017, 07:31 PM | #2 |
Captain
164
Rep 906
Posts
Drives: 2008 535xi / 2011 Z4 35Is
Join Date: Jan 2011
Location: Indiana
|
First thing to do with code troubleshooting for the first time is to clear all of them.
Come back a week or so later and see what you have and take it from there. The DSC one may be as simple as a wheel speed sensor. |
Appreciate
0
|
08-04-2017, 02:05 PM | #3 |
Lieutenant
149
Rep 510
Posts |
Thanks for your imput, I'll do that and see how she goes from there.
__________________
Dave
2011, E89 23i, Grey with Red leather.... relatively basic (getting less and less basic with every new retrofit)! My Z4 E89 YouTube channel... https://www.youtube.com/channel/UCtt...0vHFUQnoEvKB2Q |
Appreciate
0
|
08-14-2017, 03:24 PM | #5 |
Lieutenant
149
Rep 510
Posts |
OK, as an update....
Bruce (my Z4's name by it's previous owner so I saw no reason to change it!! ) went into my local (well if 30 miles away is local!) BMW dealer for it's positive feed factory recall earlier today. While it was there they were very good and gave it a full check over and found no error codes at all. Which was nice as I'd used Carly to reset them last week. I did give it a check over when I was home and no error codes at all even though I did turn my drivers seat heater on and even that didn't show up. So that's that for now, but I will keep an eye on it, just in case, meanwhile though my drivers seat still doesn't work so that is on the cards before this coming winter. So the next job is to up-spec the stereo headunit to a nice OEM bluetooth unit with built-in USB (which my current one doesn't have!).
__________________
Dave
2011, E89 23i, Grey with Red leather.... relatively basic (getting less and less basic with every new retrofit)! My Z4 E89 YouTube channel... https://www.youtube.com/channel/UCtt...0vHFUQnoEvKB2Q |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|