at last :)

[habib86]

my eisenmann exhaust arrived at last to saudi after a long wait...
ill skip work to install it tomorrow

[habib86]

opened the box and all i see is the exhaust ... no right mountings and no instructions manual ... before i buy it i asked the dealer (in uk :s) if i needed any extra parts to mount the right exhaust and he told me that every thing that u need is in the box ... if any 1 here installed the quad tip exhaust on a 23i/30i help me and just tell me what did he get when his kit arrived ? and if he had to but the mountings

[ChuckB]

PM sent with additional parts needed. They are not supplied by Eisenmann, and will run about Euro 79. there should have been a note in the box listing the additional parts required.

[habib86]

Originally Posted by ChuckB

PM sent with additional parts needed. They are not supplied by Eisenmann, and will run about Euro 79. there should have been a note in the box listing the additional parts required.

thanks alooooooot PM received and its a life saver ... nothing was included in the box about any extra parts

[entrepreneur177]

congrats with the exhaust! How do you like it?

Could you please share those parts that are required for install? I have it on my car, but one bracket is missing, which leads to unpleasant metal vibrating sounds to come from the car.

[ChuckB]

For some sully reason, was trying not to clutter up the thread, but here ya go;

18207586744 Euro 6.85 Mount
18207578238 Euro 8.90 Pipe Hanger [rubber doughnut]
51487191044 Euro 46.50 Heat shield
07146949380 Euro 0.63 Locking Nut [3 @ 0.21 each]
18107549447 Euro 14.60 Gasket [2 @ 7.30 each]
33316787390 Euro 9.30 Mounting Disc

[STOOF]

Originally Posted by entrepreneur177

congrats with the exhaust! How do you like it?

Could you please share those parts that are required for install? I have it on my car, but one bracket is missing, which leads to unpleasant metal vibrating sounds to come from the car.

you have a 35i so you already had dual exhaust, no extra mounting brackets are needed.

If you have metal vibrations your midpipes are probably just hitting the crossbrace, you can loosen the clamps and rotate the midpipes so they dont hit.