|
|
02-23-2016, 12:08 AM | #1 |
Brigadier General
569
Rep 3,742
Posts |
FS: Custom 3.75" exhaust tips for 35i/35is
For sale are a pair of custom stainless steel tips I had fabricated for my Z4 35i by Luftkraft Fabrication. They started their life as Cyba tips that were cut down to fit the unique muffler of the E89 Z4. They are double-wall tips and are a 3.75" diameter. (The stock ones are a little less than 3".) These will fill out the valences in the rear bumper and give your car a much more aggressive look for those of you who are not interested in an aftermarket mufflers but want to do better than the factory tips. As you can see from the photos, they are in a nice brushed finish and have subtle "///M" logos etched into the lips. The logos are not painted. They were etched using different blast media to create different shades of grey. I am taking a loss on these tips at this price, but I'll just be happy to see these go to a good home. A decent muffler shop should be able to install these fairly easily by cutting the OEM tips off and welding these ones on. Last edited by Hujan; 04-01-2016 at 05:43 PM.. |
02-24-2016, 07:13 PM | #4 |
Brigadier General
569
Rep 3,742
Posts |
Thanks for the kind words, guys.
I don't have any installed pics because they were never put on the car. As with the coilovers and KWs, these are just one more thing that I had waiting for the build. I should have mentioned that because the tips were designed for BMWs in general, the inlets (the small part of the tips) are the same size as the inlets on the OEM tips so they should be a direct fit. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|