|
|
04-12-2016, 01:49 PM | #1 |
Enlisted Member
4
Rep 34
Posts |
Oil Catch can kit?
Is there a oil catch can kit made for 2009 z4 cars?
I did see one for BMS however heard you need to modify some of the tubes to make it fit correctly. any suggestions in purchasing a oil catch can or other solutions? |
04-12-2016, 02:39 PM | #2 |
Private
46
Rep 70
Posts |
You can order the BMS one from N54tuning and select the 5 series hoses. That one includes a nice U-bend hose that helps to locate it in a nice spot for our cars. Then you will need a different mount for it. I found this one referenced in another thread here and just installed it a few weeks ago, worked great!
http://amzn.com/B0002MAFR4 Here is the thread where it is mentioned. http://e89.zpost.com/forums/showthre...tch+can&page=2 |
Appreciate
0
|
04-12-2016, 03:34 PM | #3 |
Enlisted Member
4
Rep 34
Posts |
Perfect thanks for the links, did you need to change some of the tubing or anything or all the necessary tubing fits with no modification other than mounting it?
|
Appreciate
0
|
04-12-2016, 04:08 PM | #4 |
Private
46
Rep 70
Posts |
You will have to modify one of the OEM tubes, this is outlined in the install instructions. Then for mounting the can on the driver side brace, I had to add a few inches of tube onto the U-bend tube. All the extra tubing and the tube splice connector came with my kit from N54tuning.
|
Appreciate
0
|
04-12-2016, 08:12 PM | #5 |
First Lieutenant
68
Rep 378
Posts |
i use the BMS catch can. the mount had to be modified to fit over the thicker Z4 strut brace.
http://www.burgertuning.com/BMW_335_oil_catch_can.html
__________________
2011 BMW Z4 35i | FBO | VTT Stg 2+ (EK, 20T clipped)| Motiv PI| Motiv Tuned | Fuel-IT Stg 2 + inline fuel pump | Spec Stg 3+ clutch | MFactory flywheel | 606whp 575Lbs |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|