|
|
07-30-2013, 04:56 AM | #1 |
New Member
3
Rep 29
Posts |
35is diffuser spec
Hello,
I'm planning a new project for my zed, exactely I want to mod my rear bumper in order to make it fitting with a quad exhaust. I'd like to put on my bumper the diffuser of the 35is but i don't know if it will be fit. So I ask you; is there someone that could tell me how long is the diffuser from A to B? (As you can see in the attached photo). Thank you. |
07-30-2013, 06:50 AM | #2 |
Captain
61
Rep 769
Posts |
ITs a hell of alot of work. I was talking with Eisenmann about getting a quad exhaust for my 35iS and they said you would have to cut the bumper significantly to make it fit their 4x76mm tips, the 2x90 however are a clean install with no modifications needed.
If you truly are going to get a quad setup, get an aftermarket bumper and save yourself the headache. |
Appreciate
0
|
07-31-2013, 10:41 PM | #3 |
New Member
3
Rep 29
Posts |
No problem about that..I'll give the rear bumper to a professionist team, in order to do a clean work
Anyway is there any good samaritan who could measure his 35is diffuser, please? Thank You. |
Appreciate
0
|
08-11-2013, 07:57 AM | #5 |
Dr. S
0
Rep 14
Posts
Drives: 2012 Z4 3.5is M, 2012 X6 3.5i
Join Date: May 2013
Location: Daytona Beach, FL
|
It depends where you measure from as it is curved and there are two spots that prevent the tape measure from touching but......but my 2012 is 31 inches. Good luck!
|
Appreciate
0
|
08-12-2013, 12:12 PM | #6 |
New Member
3
Rep 29
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|