Interchangable parts

[Fapout]

Hi everyone, first post on Zpost. I'm coming over from e90post, I was hoping someone could share with me real quick which left over parts from my N54 335xi I can put on my Z4 35i. I know the JB4 is interchangeable, what about downpipes (catless), FMIC, intakes (BMS DCI in particular). It seems like the wheel offsets are similar to 335i. I think its safe to assume that any 335 exhaust won't fit the Z4.

If somebody has this knowledge off the top of their head, it's appreciated. Searching can be a real PITA for each individual mod.

(p.s. I can't believe I spelled interchangeable wrong in the thread name!) LOL

[Constant.S]

As far as i know and from some testing trials, but dont take my word for it. Ask a shop:
Downpipes wont fit unless you cut them and weld them (not worth it and need a very VERY experienced shop).
FMIC wont be plug&play from another model but can be fitted by a good shop with just some small pipe modifications.
DCI can be fitted but not recommended, the heat-soak isnt worth it unless you're pushing more air (larger turbos).
About wheel offsets on the 335 i have no idea, sorry.

[Fapout]

Originally Posted by Constant.S

As far as i know and from some testing trials, but dont take my word for it. Ask a shop:
Downpipes wont fit unless you cut them and weld them (not worth it and need a very VERY experienced shop).
FMIC wont be plug&play from another model but can be fitted by a good shop with just some small pipe modifications.
DCI can be fitted but not recommended, the heat-soak isnt worth it unless you're pushing more air (larger turbos).
About wheel offsets on the 335 i have no idea, sorry.

Thanks. That's exactly the info I needed.

[army_men]

i have my snow tires on 3 series rims. no problem with offset.

dp does not carry over. only good shop is ar design for e89.

fmic and cp are different angles. doesnt fit out of the box.

[chudinovvn]

i have f10 17 rims on my e89. Fits well