|
|
|
Post Reply |
|
Thread Tools | Search this Thread |
08-08-2013, 02:33 PM | #1 |
Private
3
Rep 60
Posts |
FS: Titanium Exhaust Tip with Piping and custom CANFlap (Muffler Delete Setup)
Ti Titanium Exhaust Tip with Piping and custom CANFlap built into piping. (Muffler Delete Setup) The CANflap was installed into the piping so it utilize the factory CANflap setup so there would be no drone during highway driving and to also obtain low end torque. When you are WOT, the CANFlap is not in used and both piping is open. When you are cruising normally, the CANFlip is enable and only one pipping is open and the other is closed, which reduce the sound level and provide low end torque as well. I have attached some pictures of the setup. Note: You will need to cut off your factory muffler and weld the pipping to your existing exhaust pipe. It comes with hanger and everything already, so you will only need to get it welded. Price: $200 Last edited by vietnamese626; 03-07-2014 at 10:18 AM.. |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|