|
|
02-03-2019, 09:45 AM | #24 |
Registered
0
Rep 1
Posts |
E89 Fender Rondel Removal
The fender rondel is held in place by two plastic grommets inserted into the fender at the left and right side of the rondel. Use a pry tool, protect your paint and work both sides until it is off. I know this from experience having removed mine due to it being damaged and I wanted to replace it. I have seen conflicting information on this forum that nuts hold it in place or even adhesive. This was not true on my car. Even RealOEM gives the appearance of nuts. To be safe, I removed the front wheel, took of the fender liner and inspected the back. No nuts, just grommets. I hope this is helpful.
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|