Quote:
Originally Posted by sig
thanks heaps! though i was wondering, how was the installation? was it a straight forward process? did u have to cut anything or trim anything down? everything fit snuggly?
im in the process of looking for a set aswell!
|
Installation is very easy and straightforward. If you look at the link I posted, you'll see that the two metals pieces on the headlight separate to form a Y shape. Those two metal pieces are spring loaded. In order to install them you need to squeeze them together so the shape goes from a Y to a l. The headlight will NOT install if you do not do this.
Another important point. I stole this from the LUX installation guide
Quote:
When inserting the H8, there are 3 tabs that need to line up. The 3 tabs form an upside down shape of a “T”. It is helpful to use a marker and put a line or arrow on the base of the unit to figure out which direction is top. This will save you time in installing the unit.
- You can also guide the new H8 in by looking at it from the outside as shown. Notice how the tabs have rotated into their locked position.
|
Basically take note of how the stock bulb is removed and lined up. Then do the exact same only backwards when installing the new bulb.