These are he errors:
Engine module
Current Fault Codes
29E1:
29E1 fuel mixture control 2
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Signal or value below threshold
Freeze Frame Information
Odometer 52728kms 32763miles
Engine temperature 101.25 °C
air mass calculated 293.00 mg/stk
Engine speed 1,600.00 rpm
matching inlet valve model (factor) 1.13 -
29E0:
29E0 fuel mixture control
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Short circuit or signal interruption
Freeze Frame Information
Odometer 52776kms 32793miles
Engine temperature 51.00 °C
air mass calculated 108.52 mg/stk
Engine speed 640.00 rpm
matching inlet valve model (factor) 1.04 -
Gearbox control unit
Current Fault Codes
CF35:
Messages from CAS don't exist
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Timeout
Dynamic stability control DXC8 Plus - E90
Current Fault Codes
D35A:
PT-CAN: Message KLEMMENSTATUS (ID 0x130) not received. [transmitter:CAS]
Error will cause a warning light
Error is not currently present
Test conditions have been completed
Timeout
Footwell module (FRM)for vehicles up to 09/2006
Current Fault Codes
A8C5:
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
Timeout
Instrument cluster PL2 E8x and E9x
Current Fault Codes
A3B2:
CAN ID 130 error: Clamp status
Error will not cause a warning light
Error is not currently present
Test conditions have been completed
and here is the previous post for the weird feeling and pic
http://e89.zpost.com/forums/showthread.php?t=950725