Quote:
Originally Posted by tumnus
If you have the extended leather option do not follow the instructions above, or you will end up with a broken ignition key cover!
- Start by removing the centre console as per the instructions above.
- Then remove the plastic fascia underneath the head unit, it will pull free.
- There are two screws holding in the head unit, undo these and lower the head unit out of it's frame, this is covering two of the screws for the large dash trim.
- Remove the remaining screws in the glove box, once all of the screws are out you should be able to remove the trim with a trim removal tool.
- Remove the trim with the light controls with a trim removal tool, there are no screws for this piece.
|
There are two versions of the ignition key cover with different appearances: One is with clips
and screws. Just identify your version from the picture in the link below.
https://www.realoem.com/bmw/enUS/sho...diagId=41_2991