Quote:
Originally Posted by wmandra
Just a quick update on this... Had the car over at VAC to drop the oil pan and see what could be done for a baffle. Unfortunately the tolerances inside the pan are just too tight. The pan is essentially molded around the oil pump and has a small sump / recess in the bottom for the pickup. So it doesn't look like a baffle solution will be possible. New plan is to install an Accusump system into the car in the next few months with an electronic pressure control valve that will open in the 20-25 psi range (which is just below idle).
|
Also curious to know if he accusump oil system was ever installed.