[ErnestY]

finished applying my vinyl wrap on my trim! saw another members work and had to copy it!!! i had to snap the aft internal trim attachments on the door handle trim as it is melted into place from factory. reattached handle trim to door panel with 3m double sided tape. i drilled the trim attachments from the a/c and light selector sections and re-glued them back with epoxy. i highly recommend apply heat after applying vinyl to trim, it better activates the adhesive and form the vinyl in place. otherwise bubbling or "pleating" can occur after a few days. thats what happened to me. after i applied a little heat from my heat gun, three weeks and no issues yet.