Alright, so it is possible to get that cowl off without removing the steering wheel… I’ll give it a try.
The new cable basically is a splitter like the other LVDS cables. Your OEM mic plugs into the splitter and the splitter plugs into the main wiring harness of the car. Then you route the 3.5mm jack plug to the main harness of the Mr12Volt that has a AUX port in it now. The port seems a bit beefier than a low quality Chinesium AUX port so I think they are trying to keep the OEM sound quality with this. Basically the AUX port seems beefier than the video RCA input ports for the cameras. Anyway will try to snap some photos of the mic install if I can get the cowl off.
|