New 2009 2010 BMW Z4 - ZPOST - View Single Post

Mr. ///M3 RD · 09-04-2010, 01:26 PM

teagueAMX

I was hopping to check it this weekend in the vertical boring mill (my friend is gone to a wedding this weekend), it will have to wait till next weekend. I will perform a very careful TIR check once I've set up the wheel. Then I will check TIR on the outside diameter (spoke side of wheel and opposite spoke side).

I plan to indicate it from opposite the crack (180 degree) toward the crack going clockwise and counter clock wise (due to the crack).

I will know then the shape of out off roundness.

09-04-2010, 01:26 PM	#3
Mr. ///M3 RD Happy Camper 612 Rep 7,869 Posts Drives: C63 AMG & 280 SL on Weekends : Join Date: May 2010 Location: GTA, Ontario - Canada iTrader: (0) Garage List 1969 Restored Merce ... [7.50] 2011 M3 Coupe TRADED [7.34] 1987 BMW 535is [1.00] Cars from the Past [6.50] The ///M3 Engine S65 [9.59]	teagueAMX I was hopping to check it this weekend in the vertical boring mill (my friend is gone to a wedding this weekend), it will have to wait till next weekend. I will perform a very careful TIR check once I've set up the wheel. Then I will check TIR on the outside diameter (spoke side of wheel and opposite spoke side). I plan to indicate it from opposite the crack (180 degree) toward the crack going clockwise and counter clock wise (due to the crack). I will know then the shape of out off roundness. __________________ Cheers, Rolf-Dieter Life will take us to some interesting places, fortunately The ///M3 will too with a many of us know this very well, now my C6.3 AMG with 487 HP does it too ---> Click here for some good stuff I found
	Appreciate 0 Quote