Quote:
Originally Posted by cdmulders
I've used the Langka system often over the past 8 years. I use the BMW touch-up paint that has both the base colour and the clear coat in separate containers. With the base colour, I too find it is very hard to get a flush finish, and the result is a little dull. I use the clear coat for the second application, and go very lightly with the blob remover, after letting the clear coat set for at least 4 hours. It seems to work well and the repair is almost perfect. I've found that the best way to get a flush repair is to let the touch-up paint set for several hours, and then go slowly with the blob remover.
I've also used Dr. Colorchip too (on a previous car) and it does work well for the smaller paint chips on the front bumper, but it does not work well for large chips as it generally does not provide a flush repair. Cheers.
|
I used the Langka system. I tried following instructions with kit. Never got a good result. There was a depression in chip fill and the paint was dull. I went to Langka website and tried the second method recommended and it worked much better. Basically you level the paint in the chip with the plastic card while paint is wet.