|
Thanks you guys for the help,and advice,
JPjames - you were right with the getting to that pipe since i needed to remove the fan it seems to get to it , so instead i just drained the coolant from the radiator and vacuum filled it with the 50/50 bmw blue and distilled water. ( i premixed it). i ran the bleed process to get the old coolant and new to mix since i didnt want to run the pump while there was minmal amount of coolant in the system. after the bleeding process was done i drained and repeated the process 1 more time. it seems like i was able to get most of the old coolant out and replaced it with the new one.
I did use extra coolant but i didnt want to get to that hose which seemed tight to get to.
anyway thanks for the help. and advice again
|