|
Simple, remove large rubber cap from the top of the headlamp assembly and you should see brown and white wire (I think) running around the edge of the space and then to the bulb itself. The bulbs rotate towards the centre if the car (using the bulb base and wiring connector) and then slide backwards (towards rear of car) upwards and carefully out. Then carefully prise off the connector by lifting the two clips either side - being v careful not to touch the bulb glass with your skin.
Installation is simply the reverse.
Cheers,
David
__________________
2012 e91 318d Touring
Executive Edition
Vermilion Red
Automatic
Business Nav
|