Quote:
Originally Posted by jts1981
Hi Bill,
Is the new mount welded to the wishbone? The pic looks only clamped on. I would worry about hard hits and it becoming dislodged. This happened to me a few weeks ago with a stock set up.
Also can you please clarify what mod was done to the regulator rod? Would it be easy to replicate?
Thanks again!
Jake
|
The mount is just clamped on, though it's pretty tight. The OEM regulating rod just clamps on as well so I don't think this is much of a problem.
The M3 regulating rod had to be cut and re-welded with a different offset on one side. We just used the stock one as a guide to modify the M3 one.