Quote:
Originally Posted by Rafale
Not sure how to remove it. I have the brushed aluminum trim and it looks to be two pieces compared to the one piece on the picture...
|
That is true, the light switch panel is 2 pieces, but they held together with "welded" plastic pins. If you look at Stafainn's picture on page 1, the outer plastic piece is covered by leather, but the construction is the same. Pull from the top left side first, once the clip releases grab it top and bottom along the center line and pull at the top and bottom in an alternating fashion to wiggle out the 2 right side clips. It does take a bit of force, but never more than 2 fingers worth.