Quote:
Originally Posted by HowieZ4
Fantastic wheel design and black/w machined face goes perfectly with your Z4 javol
I'm looking to pick up a set of these Vossen CV3 for my Z4 and was wondering if it's possible to fit these staggered set up?
FRONT: 20x10 Vossen VVSCV3 CV3 (without spacers?)
REAR: 20x10.5 Vossen VVSCV3 CV3 (same as your fitment)
You mentioned that your front 20x9 Vossen didn't have much of a concave but will the 20x10 be more concave and if so, were you not able to fit them? Rubbing issues?
I would consider 19" as well if there is less risk of rubbing while getting a more concave look on the front wheels.
Thanks!
|
20x10 on front of the Z4 E89 would stick out too much: I have 9 mm of inner space with my set up, the above mentioned 20x9 et 35 + 5 mm spacers = 20x9 et 30. A 20x10 wheel is 25.4 mm wider than a 20x9 and the result, in order to avoid the inner rubbing with the coilover, would be 25.4 - 8 = + 17.4 mm on the set up shown in the pics: clearly exaggerated.