Then I have retrofitted a M footrest on my Z
There is one problem with retrofitting the original M footrest, it`s not possible to buy for the Z4 E89
I think it is because the dam footrest is glued to the floor.
So, this is what I did. I bought a F10 M footrest on ebay, the footrest looks the same but the F10 one is wider. So I had to split it to get the shape that would be possible to fit in the Z4
So here it goes:
The old one goes... Its really hard work to get it off
The mark shows how much that will have to go
Cutting away the extras from F10
After cutting, a little rough on the edges
So some grinding had to be done to get it all even
After grinding
Glue on footrest
Glue on carpet
Final result