All the comments are personal opinion taken with a grain of salt.
At least there are 2 positive comments.
The key for the large peices like the deck lid was to clean very good with isopropyl alcohol many many times.
I laid out the sheet and trimmed it to reasonable excess size.
Starting in the middle I cut the backing paper off to about 2 feet wide and adhered this section first so as to be able to stretch the CF material for a smooth wrinkle free application top to bottom and side to side.
I then pulled the rest of the backing paper off one side at a time and worked for the middle outward.
Around the edges and wrapping on the under side was labor intensive because of the many plastic tabs etc. I cut The CF to fit as perfect around the under side as possible to acheive a flat smooth wrap.
It took me close to 4 hours.
|